STAND FOR DISASSEMBLY OF CARDAN SHAFTS P2515K
HYDRAULIC STAND FOR DISASSEMBLY OF CARDAN SHAFTS OF ANY SIZE
FEATURES COMMON TO ALL MACHINES
HYDRAULIC STAND P2515-K is designed for cardan shaft disassembly, it is also designed for quick and effective disassembly of the hinges and replacement of the trunnions in the joints of cardan shaft.
Large set of tools and devices allows to disassemble almost all the existing types of cardan shaft joints.
Hinge disassembly time, even on the cardan shafts of freight transport is no longer than 3-5 minutes.
Puncheon is installed and fixed in the housing on the faceplate of the vertical head of the press, corresponding to the yoke bearing diameter.
Using the upper clamp, gently push the shaft yoke rings until the bearing cage starts to come out from below and enters the opening formed by the inner clamps and the lower pusher.
Continue to exert pressure until the cross is close to the flange yoke.
Clamp the bearing cage using proper force. With the help of the lower pusher, push out the yoke, removing the bearing cage from it.
The press is designed for work in repair shops, does not require special knowledge for operation and maintenance.