VNT FLOWBENCH GEOMET 2000

Commercial offer for equipment

Leave a request, our manager will contact you to clarify the details for preparation of the commercial offer

FOR CONFIGURING AND TESTING THE TURBOCHARGER GUIDING BLADES GEOMETRY ALTERATON.

The machine is designed to alter a turbocharger using  an adjustable nozzle  which allows to get back to factory values (with a vacuum valve / or electronic valve)

Geometry 2000 is a test bench which is purposed for after repair works.

This stand can adjust the geometry of turbochargers without the need to rotate the shaft either with vacuum, air and electronic control.

A unique feature of Geometry 2000 is that it has the ability to check the N75 valve, which allows you to perform vehicle troubleshooting tasks.

Also, the stand allows you to determine the state of the actuator spring, which makes it possible to better assess the condition of the turbocharger.

TURBO TEST

Database of 2100 turbines with the ability to add via USB or independently via tuned turbine from the manufacturer.

Measurement of air flow through the mechanism of variable geometry of the turbine and comparison with the reference data from the manufacturer.

Rod stroke test at a given vacuum without air suction: initial stroke, working stroke, final stroke – stop.

Test of the valve operation and the nozzle unit opening level with the vacuum decrease in the valve and the elastic resistance of the valve spring.

Self-diagnostics, all systems operation test.

Create and print out a report on the configuration performed.

Parameters Geomet-2000
Required pneumatic system pressure, MPa 0,6 – 0,8
Maximum vacuum pump capacity, m3/h 180
Dimensions (lengh x width x height), mm 1190 х 520 х 1730
Machine weight, kg (approx) 250
Power Supply Parameters 220V ± 10%, 1 Ph, 50Hz ± 1
Power consumption, no more than, kW 1,5
Software Turbo Test
Foundation requirement The machine is installed on an ordinary hard floor in the workshop

GEOMET-2000 flow bench in assembly for tuning the variable geometry of turbines – 1 pc.

Set of adapters for installation of turbines – 1 set.

Digital indicator for measuring the rod stroke – 1 set.

Operation manual – 1 pc.

 

Design features of the machine

 

Turbine’s exhaust valve is installed on a magnetic or transition adapter. For turbines made of non-magnetic materials, it is possible to fasten them with clamps.

The maximum turbine performance is adjusted by measuring the air flow (air suction) through the guide vanes with the fixed turbine rotor.

The stand is equipped with a vacuum pump to create a flow of air through the turbine.

Control of the turbine vacuum valve from the pneumatic system of the stand. Adjustment of the turbines with the electronic actuator takes place when connected to an external tester, for example VNTT-PRO DeltaTech.

Rod stroke measurement with a digital indicator, and values display on the computer screen.

Services

REPAIR & MODERNIZATION

More

Customer Support

More

AFTER SALE SERVICE

More