CARDAN BALANCER VTM 77D

Commercial offer for equipment

Leave a request, our manager will contact you to clarify the details for preparation of the commercial offer

WITH WELDING MODULE

UP TO 100 KG

CARDAN BALANCER VTM 77D  has a high performance and is used to balance cardan/drive shafts of the cars and trucks. It makes the process of balancing the driveshaft simple thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows your business to grow efficiently.
The machine has high accuracy (1 gmm \ kg). Accuracy is achieved due to the special design of the spindle and the rig of the machine, as well as a reliable balancing system, PAK-4, which has a high degree of noise immunity. Ease of control allows you to quickly learn how to work on the machine and get to work as soon as possible. When designing the machine, high demands were placed on the functionality and versatility of each node, this made it possible to install absolutely any driveshaft on the machine with a minimum of time.

The method of eliminating the imbalance is by welding corrective weights (plates) by resistance welding. The machine has one welding pliers on the rails, with the ability to move along the bed

REAL TIME DISPLAYED IMBALANCE MEASURING
OWN ADVANCED MEASURING SYSTEM
25 SECONDS MEASUREMENT TIME
UP TO 4 SUPPORTS SHAFT COMPATIBILITY
SELF-DIAGNOSTICS FUNCTION
LEIGHT HEIGHT SUPPORTS TECHNOLOGY
5 SECONDS SHAFT CONNECTION
ETHERNET CONNECTION FOR DIAGNOSIS
LANGUAGE SELECTION
CUSTOMISED PRINT OUT OF BALANCE DATA
17-INCH TOUCH SCREEN MONITOR
LIGHT HEIGHT SUPPORTSWITH WELDING MODULE
3 WELDING MODULES
VARIABLE FREQUENCY ASYNCHRONOUS ELECTRIC DRIVE
SIMULTANEOUS 4 PLANE MEASURING
DATA STORAGE TO INTERNAL FLASH MEMORY AND USB MEMORY STICK
OPERATION & SERVICE PERSONALIZED MANUALS
INTUITIVE SIMPLE OPERATIONING
HIGH PRODUCT RELIABILITY
SAFETY OPTIONS MODIFICATIONS
LOW-COST SPARE PARTS
BALANCER MANUFACTURER SINCE 1973
OEM AND AFTERMARKET REPAIRS
12 MONTHS WARRANTY
Parameters VTM-77D
Balancing rotors weight range, kg 3 – 100
Maximum rotor diameter, mm 150
Maximum flange diameter, mm 300
Max. cardan shaft length, mm 5500
Number of bearings 4
Support type Hard-Bearing
Number of simultaneously measured planes 2, 3, 4
Rotor rotation speed range, rpm 400 – 4000
Minimal achievable residual specific unbalance, gmm/kg 5
Electric motor power, kW 3
Equipment Balancing system PAK-4
Ready-assembled balancing machine of the model VTM 77D

With balancing system PAK-4

1 p.
Universal cam clamping adapters for driveshafts with a flanges diameter ranging from 90 mm to 125 mm 2p.
The centering ring to the universal adapter for driveshafts installation of of the car Sprinter W906 2p.
The  special-purpose adapter for cargo cardan flanges of big diameters 2p.
The operation manual on the machine with acceptance tests reports and the basic electric circuit 1 p.
The operation manual on balancing system 1 p.

Design features of the machine

FOR ANY DRIVE SHAFT

  • Drive shaft weight up to 100 kgs
  • Drive shaft length up to 5500 mm
  • 2-, 3- and 4-support shafts
  • Universal cam clamping accessories
  • Central bearing clamp by three methods

SIMPLICITY OF OPERATION

  • Design is job-proved and time-honoured
  • Dismountable, serviceable, maintainable
  • No additional expenses on maintenance and and calibration testing

 

PAK-4 SPECIAL BALANCING SYSTEM

  • Real time measuring
  • Measuring time is 25 seconds
  • Displays the angle and the load weights for all planes at once
  • Easy-to-learn, little theoretical knowledge is required

 

OPTIMUM DESIGN

  • The most available and the most reliable in the market in this class
  • It is checked in own division on repair of driveshafts

PAK-4 SPECIAL BALANCING SYSTEM

Digital system on the basis of the industrial fanless computer with the touch screen and the measuring block.

Setup of the machine by 3 starts method with use of calibration weights on serial drive shafts with an initial unbalance.

Calibration of the machine is made by the operator that allows reaching the maximum sensitivity of the machine, and avoids from a duty to pay services in calibration of the machine once a year.

Automatic system of start-up measurement on reaching the adjusted rotation speed.

 

  • Simultaneous balancing in 4 planes, with a possibility of the 2, 3 – plane balancing
  • Information on the welding point and load weight is displayed for all planes at the same time.
  • The system shows angular position of the driveshaft in real time (the watching system).
  • The harmonic test of vibration sensors helps to carry out diagnostics of a mechanical part of cardan (to analyze separate components of vibration and their sources).
  • Printing of reports on the carried-out rotor balancing.

Services

REPAIR & MODERNIZATION

More

Customer Support

More

AFTER SALE SERVICE

More