9D716E

Commercial offer for equipment

Submit your request, and our dedicated manager will reach out to fine-tune your personalized commercial offer.

    ELECTRIC MOTOR BALANCING MACHINE 9D716E

    WITH BALANCING SYSTEM PAK-1

    UP TO 500 KG

    ELECTRIC MOTOR BALANCING MACHINE 9D716E is a hard bearing type of equipment .
    The machine has high accuracy (0,4 gmm \ kg). Accuracy is achieved due to the special design of the spindle and the rig of the machine, as well as a reliable balancing system, PAK-1, which has a high degree of noise immunity. Ease of control allows you to quickly learn how to work on the machine and get to work as soon as possible. When designing the machine, high demands were placed on the functionality and versatility of each node, this made it possible to install absolutely any driveshaft on the machine with a minimum of time.

    The width of the support rollers and roller cartridges allows the rotor to be installed with a very short length. Highly located “roller cassettes” allow you to create products with different overall dimensions, and the modular design allows you to increase the standard dimensions of the machine due to spacers and accessories.

    The support has the ability to adjust the “roller block” in height, this allows you to balance the rotor with different diameters of the support journals, and also allows you to center the rotor when setting up the machine.

    Features common to all machines

    ALL-METAL SUPPORTS FOR ROTORS WITH HIGH INITIAL UNBALANCE.
    LONG STROKE BELT DRIVE
    REAL TIME DISPLAYED IMBALANCE MEASURING
    OWN ADVANCED MEASURING SYSTEM
    SELF-DIAGNOSTICS FUNCTION
    ETHERNET CONNECTION FOR DIAGNOSIS
    LANGUAGE SELECTION
    CUSTOMISED PRINT OUT OF BALANCE DATA
    17-INCH TOUCH SCREEN MONITOR
    SPHERICAL ROLLERS ENSURE STABILITY OF PARAMETERS AND ACCURACY OF MEASUREMENT
    25 SECONDS MEASURING TIME
    ROLLER CARTRIDGES ALLOW BALANCING OF ROTORS WITH “NARROW” BEARING JOURNALS.

    SUPPORT ROLLERS ARE DESIGNED AS A FULL BEARING ASSEMBLY WITH DISMOUNTABLE CONSTRUCTION, WHICH SIMPLIFIES ITS MAINTENANCE
    DATA STORAGE TO INTERNAL FLASH MEMORY AND USB MEMORY STICK
    REPLACEABLE CARTRIDGES WITH MOUNTING PRISMS ALLOW BALANCING OF VARIOUS ROTORS IN OWN BEARINGS OR BEARING ASSEMBLIES
    OPERATION & SERVICE PERSONALIZED MANUALS
    INTUITIVE SIMPLE OPERATIONING
    HIGH PRODUCT RELIABILITY
    SAFETY OPTIONS MODIFICATIONS
    LOW-COST SPARE PARTS
    BALANCER MANUFACTURER SINCE 1973
    OEM AND AFTERMARKET REPAIRS
    12 MONTHS WARRANTY

    Main Specifications

    Parameters 9D716E
    Balancing rotors weight range, kg 5 – 500
    Maximum rotor diameter (over the bed), mm 1300
    Rotor bearin journals diameter, mm 30 – 180
    Distance between rotor bearing journal centers, mm, min/max 200 – 2000
    Support type
    Minimal achievable residual specific unbalance, gmm/kg 0,4
    Rotor rotation speed range, rpm 300 – 1500
    Drive type Frequency-controlled asynchronous electric drive
    Electric motor power, kW 2,2
    Drive gear type Belt
    Equipment Balancing device
    Bed length, mm 1600

    * The parameter can be changed as per the customer’s request

    MACHINES CAN BE DELIVERED WITH

    AXIAL (CARDAN) DRIVE PARTS;

    A BELT DRIVE PARTS – OPTIONAL;

    COMBINED – OPTIONAL.

    The operation manual on the machine with acceptance tests reports and the basic electric circuit 1 pc.
    The operation manual on balancing system 1 pc.

     

     

    PRODUCT HIGHLIGHTS

    High universality

    Service in the EU

    Short time measurement

    Low-cost maintenance

    Reliable and productive

    Quick payback time

    Design features of the machine

    The unique micro-tuning mechanism ® technology eliminates the “thread” effect (when the rotor moves axially) on the bitter balancing machine.

    The supports are set relative to the bed with a chain mechanical drive, this simplifies the setup process.

    The special design of the supports allows you to install the rotor without paying attention to its length, the only limitation is the width of the “drive belt” and the length of the bed. (By special order, the bed can be made under the rotor of any length).

    The “belt drive” has the patented LONG STROKE ® design which allows with just two drive belts to balance any rotor.

    An alternative to a “belt drive” is an “axial drive”, which uses a cardan shaft that is capable of transmitting large torque from the electric motor to the rotor. Such a drive is used for parts with high aerodynamic drag. The axial drive of all machines of the 9D series is equipped with a full-fledged quill.

     

    By special order, it is possible to order a combined version of the machine (with two drives: axial and belt).

    Belt drive provides versatility of the machine, large travel of tension pulley allows only one or two belts to be used. Belt installation does not require disassembly of the unit.

    All electrical equipment is located in the cabinet, the outer cables are in metal hose. The assembly matches CE standarts.

    Preconfigured frequency-controlled asynchronous electric drive allows control of the rotor speed, acceleration and deceleration process.

    Safe working conditions on the machine are provided by rigid stops, protective covers of the drive belt and rotating pulleys, safety interlocks, ergonomic controls, etc.

     

    Crankshaft Balancer 9D715US
    Crankshaft Balancer 9D715US
    Crankshaft Balancer 9D715US
    PAK-1

    PAK-1 BALANCING SYSTEM

    Digital system is based on an industrial fanless computer with a touch screen and a measuring unit.

    Set-up mode by “triple start-ups” method with the use of calibration weights on the serial rotors with initial unbalance.

    Calibration of the machine is made by the operator enabling to reach the maximum sensitivity of the machine, thus exempting from the duty to pay annual calibration fees.

    • Calculation of the balance tolerance values in default of technical documentation for the balancing product.
    • Value calculation of the correction test weights to simplify the tuning process for the balancing rotor.
    • Real-time balancing display, i.e. if there is any defect or a hindrance of a rotor, it’s visible immediately as fluctuation in measurement result.
    • View of unbalance value in grams, gmm, gsm, gmm / kg optionally.
    • Taking into account the eccentricity of the balancing mandrel.
    • Unbalance distribution on n-planes correction
    • Calculation of hole depth for correction of unbalance.
    • Possibility of decomposition of correcting weights into structurally conditioned anchoring points (blades, fans, slots).
    • Rotor balancing report creating and printing.
    • USB port for printer connection, USB-flash memory, port for connecting to local network and Ethernet network.
    Edit Template

    Request Your Custom Equipment Offer Today!

    Take advantage of cost savings, unmatched service, and qualification enhancement

    Enjoy a 100% Money Back Guarantee
    Benefit from Discounted Shipping Costs
    Receive Free Online Job Skills Training

    Submit your request

    and our manager will reach out to fine-tune your personalized solution for you

      You may also like…