Get a comprehensive offer to open your turbine repair from a single source
We produce the whole complex of equipment for cardan shaft balancing.
We share the experience of two of our own cardan shaft repair services.
We repair cardan shafts ourselves and work on our equipment, so the equipment is adapted for those who work on it.
With our equipment, the payback period of your business will be reduced by 2-3 times.
We do not sell a franchise, every customer gets what he needs.
Be the first in your region.
CARDAN SHAFT MARKET SIZE
This market is characterized by a large number of special equipment, for which cardan shaft spare parts are not always available. In addition, the cost of new cardan shafts can be just enormous.
All trucks + all special equipment + most of the minibuses are equipped with cardan shafts.
The fastest growing segment of the automotive market is the “SUV”. It is in this segment that most of all new products are presented by automobile manufacturers in recent years. Most of the SUVs are all-wheel drive or have all-wheel drive versions.
Accordingly, these global trends will work for you if you start a cardan shaft repair business.
In Odessa there at least 7 cardan shaft repair shops and at least 5 turbocharger repair shops (not counting ones without equipment) in a city with a population of 1 million people. All these workshops have enough space and work in the local market.
Now the market is dominated by the situation when cardan shafts from the regions go to some neighboring regional center or to the capital for repairs. However, in the future it will not be that way. Regional repair has a number of clear advantages over the capital. And these advantages will eventually become decisive:
1. Absence of and monetary expenses for transportation, which the reduces the trasnport downtime.
2. Regional repairmen have the opportunity to see a car from which a cardan shaft has gotten into the repair. The turbine is a dependent unit. It, as a rule, fails due to external causes. If this cause is not eliminated, it will break the turbine further. The absolute majority of negative reviews about the repair of turbochargers are associated not so much with poor-quality repairs as with “non-elimination” of the initial problems of the car. And access to the direct owner of the car, the service station that serves the car, and the car itself greatly increases the possibilities for solving the problem as a whole.
3. Lower wage level in the region.
4. It is possible to remove and install the shaft back.
5. In the capitals of different countries it is very expensive to remove / install shaft + there is nowhere to store the car during the repair.
Statistics show that in cities of 300 thousand people this business will be profitable.
In cities with population of over 1 million people, from 2 to 5 workshops can work comfortably. These figures are typical for 2014, and with the growth of the market they will increase.
Over the years, we have seen hundreds of companies that have opened cardan shaft services. We learned from them just like they learned from us. Very often we “walked” side by side and noted both good luck and mistakes.
We have accumulated vast experience and are ready to share it. Summarizing this experience, we can safely say that all successful companies in this area are very similar to each other. And all the unsuccessful are unsuccessful for various reasons.
We can confidently show you a quick and direct path to success in this field.
We ourselves have walked it.
We successfully repair cardan shafts using our own equipment, and we ourselves apply the skills we teach to other people.
In the market there are companies that produce/sell balancing machines, but they themselves never worked on them and have no idea about their flaws.
In the market there are companies that sell cardan shaft spare parts, but often do not know anything about these spare parts because they never checked them themselves. They did not check the conformity of the geometric dimensions of spare parts, did not install them in cardan shafts and did not have any repair experience using these spare parts.
Almost everyone who repairs something has something to learn from. Each of these people, in some way, modifies the technology, finds its technical solutions. You will fint them too if you start this business.
We do not sell the franchise and do not “tie” to ourselves forever (although we understand that this would increase our income).
This is due to the fact that we cooperate with a large number of enterprises in the market, who only need our equipment, since they themselves have gone the rest of the way and just do not need our training, pare parts, etc.
Here you can buy only what you need
WHAT DO WE OFFER?
1. Demonstration of a successful working repair company.
2. Supply of balancing equipment (the whole set).
3. Supply of auxiliary equipment.
4. Free training to work with all equipment supplied.
5. Help and advice in selecting the rest of the equipment.
6. Cardan shaft repair process training is chargeable (in fact, we’re sharing repair techniques developed by us and our partners).
7. The supply of quality spare parts for repairs + advice on where you can also purchase spare parts, since a very wide range of spare parts is required here.
8. We answer any questions, from the sales organization, to questions about the wage fund size (the level of people is very different, we try to help with what the person needs).
9. We introduce our clients to each other so that they can continue to communicate with each other. (For many it became very useful)